How do you connect the Sky Viper drone to a phone? The Sky Viper Drone is a remote-controlled quadcopter that you can fly with your phone or computer. It has a flying controller, two cameras on the front, and gyro devices.
It works with both iOS and Android phones and tablets. A Bluetooth link between the sky viper and your phone or computer is the best way to fly it. This makes it much easier to fly the drone.
In this comprehensive guide on connecting your Sky Viper Drone to your phone, we’ve covered essential steps and troubleshooting tips to ensure a smooth and successful experience. The Sky Viper Drone, equipped with a flying controller, dual front cameras, and gyro devices, offers an immersive flying experience compatible with both iOS and Android devices.
Here are some easy steps to link your Sky Viper drone to your phone:
1. Go to the app shop.
2. Look for the app Sky Viper.
3. Get the Sky Viper app for your phone. Hold down the power button until you see a green light. Open the Sky Viper app and tap “Connect” when the light goes green.
If you still can’t get the Sky Viper Drone to connect to your phone, don’t worry. I’ll show you how to do it in this piece. Then, you can successfully link your drone to your phone.
Also Read: How To Make A Drone Jammer?
Also Read: How Much Does Switchblade Drone Cost Per Unit?
Also Read: How To Connect Deerc Drone To Phone?
Step-By-Step Instructions On How To Connect Sky Viper Drone To Phone
The following article provides a step-by-step tutorial on how to link a Sky Viper drone to a phone. Take your phone and your drone, and then proceed to apply each of these procedures in turn. Before you carry out the whole procedure, please follow the below steps:
✅ Check Your Phone’s Battery
✅ Check Your Drone’s Battery
✅ Perform a Pre-Flight Inspection
✅ Verify GPS Signal
✅ Update Firmware and Software
✅ Calibrate Sensors (if required)
✅ Check Local Regulations
✅ Choose a Suitable Flying Location
✅ Maintain Visual Line of Sight
Step 1: Charge Your Drone
Ensure that your smartphone, which you will be using to control the drone, is fully charged.
A fully charged phone ensures a stable and uninterrupted connection between the drone and the controller app. It also prevents unexpected disruptions during the flight.
Confirm that the drone’s battery is fully charged before taking off.
A fully charged drone battery ensures an optimal and longer flight time. It reduces the risk of the drone losing power unexpectedly, which could lead to accidents or damage.
Step 2: Download The Free Sky Viper App On (Play Store/App Store)
The Sky Viper app for phones lets you connect your drone to your phone and see live video of what it sees. You can also use your phone to handle the drone and do other things with it, like taking pictures, set routes, and more.
To download this app, go to the App Store on your iPhone or iPad and search for Sky Viper. Once you find it, tap on “Get” and then wait for it to download.
Start by going to the App Store or the Google Play Store. Look for the application. Set up the application.
After you have completed the installation, you may start using the application. If you want to fly your drone, you may now utilize the app. The app gives you the ability to operate your drone while it is in flight. When it comes to piloting your drone, this is a really significant tool.
Step 3. Give Access to The Sky Viper App On Your Device
Now you are very close to knowing all about “How To Connect Sky Viper Drone To Phone?“After getting the Sky Viper app from the App Store OR Play Store and installing it, you will need to allow it to use your phone’s camera. Suppose you want it to find nearby flying fields or weather information quickly. In that case, you will also need to let it access your position.
Your device’s camera and microphone must be turned on for the Sky Viper Drone app to work. When you first opening the app, it will ask for permission.
To get the most out of those tools. If you still want to use the app, tap the OK button. You’ll need to tap OK one more time to move on. The software can use your device’s camera and microphone.
Step 4: Power On Your Sky Viper Drone
The Sky Viper Drone should be activated. The first step is to press and hold the power button for three seconds. To activate your drone, you need to keep the power button depressed for three seconds. It will then be ready for use.
Step 5: Turn On Your Phone’s WIFI
Connection: Go to your WiFi settings on your phone. Click on the WiFi option under the list of wireless networks. Enter the network name and password for the WiFi network. Connect your smartphone to a WiFi network.
Step 6: Connect Sky Viper Drone’s WIFI
The next step is to connect your iPhone to the WiFi network of the Sky Viper. The “WiFi” button on the screen and clicking on the first WiFi network that comes up can be used to do this.
Now, the drone will link to your iPhone and show you how much power it has left. You can also see how long it has been flying since it was last charged if that’s important.
Step 7: Select Your Sky Viper Model In The App And Tap “Connect.”
The last step to your query “How To Connect Sky Viper Drone To Phone? “Ensure that your smartphone is connected to the internet and has the Sky Viper app installed. If not, download and install the app from the respective app store (Google Play for Android or the App Store for iOS).
Open the Sky Viper app and log in using your account credentials. If you don’t have an account, you may need to sign up.
Once logged in, the app will likely display a home screen or dashboard. Look for a section that lists your available drone models. This might be labeled as “My Drones” or something similar.
Locate the specific drone model you want to connect to and tap on its name or icon. This action should take you to a detailed view or control panel for that particular drone.
Within the drone’s control panel, there should be an option to connect or pair the drone with your phone. This might be labeled as “Connect,” “Pair,” or something similar.
After selecting the drone, scroll down within the app. Sometimes, additional options or settings are available lower on the page.
Look for an option that says “Pair” or “Start Pairing Mode.” When you find it, initiate this action. The drone should respond by starting to blink, indicating that it is now in pairing mode.
Once the connection is established, you may receive a notification or see a confirmation within the app. The drone’s blinking pattern may also change to indicate a successful connection.
Now, your Sky Viper drone should be successfully connected to your phone, and you can start exploring the app’s features for controlling and monitoring your drone.
Also read: How To Connect Tello Drone To Phone? Latest Guide-2023
Quick Fixes: Sky Viper App and Drone Connectivity Problems
For troubleshooting, there are some quick fixes, such as rebooting the drone or ensuring the app is up-to-date, which can resolve connectivity issues. Additional settings, such as resetting the app settings and camera settings, provide a clean slate for a fresh connection attempt.
Now you have got through all the procedures about “How To Connect Sky Viper Drone To Phone.” But troubles with technology always exist. The following is a list of typical problems and the answers to those problems in case you are experiencing difficulties connecting your Sky Viper drone to your phone:
Rebooting Your Drone
If your Sky Viper Drone won’t connect to your phone, try restarting it:
- Take out the drone’s battery.
- Wait for 10 seconds.
- Put the battery back in.
- Close the battery compartment.
- Close the drone app and open it again to try connecting.
App Update Alert
Ensure your app is up-to-date:
- Tap the menu icon on the left side of your screen.
- Tap “Settings.”
- Then, tap “General.”
- Select “Software Update.”
- If there’s an update, it will download automatically.
Refresh Your App
Try resetting your camera settings:
- Open your phone’s Settings app.
- Tap “General.”
- Tap “Reset.”
- Choose “Reset All Settings.”
- Confirm by tapping “Reset Settings.”
Now you’ve cleared up the resetting of your Sky Viper Drone App.
Frequently Asked Questions About (How To Connect Sky Viper Drone To Phone)
How To Connect Sky Viper Drone To Phone?
You connect the Sky Viper to your phone to sync it. After connecting, the Sky Viper app lets you handle the drone and do many things, such as taking pictures and movies, changing the speed and altitude, and more.
Which App Do I Use For A Sky Viper Drone?
The Sky Viper name made an app called Sky Viper. It lets you see and handle your drone at the same time. You can also see what’s going on around you and get information and updates about the drone’s battery life.
How do you pair the Sky Viper Drone with the controller?
You’ll need to pair your drone with the joystick the first time you get it. This is an easy step-by-step process that takes minutes.
- Hold down the power button for three seconds to turn on the drone. The LEDs will then start flashing orange.
- To turn on your joystick, put batteries in it and press and hold the power button for three seconds until the LEDs turn on and start flashing green.
- You can pair multiple controllers at once by holding down both sticks until they flash red.
- Then, release them one at a time until they flash green again, and then pair them with another controller.
How do I reset my Sky Viper drone?
Turn on the TX, connect a battery to the Sky Viper, turn the Sky Viper over so it’s on its back, and hold down the PHOTO and VIDEO buttons at the same time for a few seconds. This will reset the SSID and password to their original settings. After taking the battery out of the Sky Viper, put it back on its feet.
Why Can’t I Connect To My Sky Viper Drone?
First, make sure your Sky Viper drone is on if you can’t connect to it. Make sure there aren’t any things in the way of your device and the drone as well. Wireless data may need to be fixed by this.
Press and hold the power button on the drone until it goes off and then back on. This will reset the drone if you’re still having trouble linking. If that doesn’t work, turn off your device and the drone for a few minutes and then try again.
What Is The Sky Viper Default WIFI Password?
Connect your device to the Sky Viper via WiFi when the app asks you to or if you want to use the WEB AP interface (Advanced choices). The WiFi SSID will be SKYVIPERGPS_xxxxxx, where xxxxxx is the drone’s serial number. The password by default is “vipergps” (do not put quotes around the password).
Conclusion (How To Connect Sky Viper Drone To Phone)
In conclusion, there are many different ways to control and connect the skyviper. Some of the most popular methods include Bluetooth, WiFi, and even the Sky drone mobile app.
How To Connect Sky Viper Drone To Phone: The app is straightforward to use > All you have to do is download it on your phone and then open it. Once you’ve done that, you’ll be able to control the sky viper using your phone.
By following the above guide, you should be able to connect your Sky Viper Drone to your phone easily. Make sure your devices and app are up-to-date, fix common problems, and then start a whole drone flying experience. You can explore the sky in a lot of different ways if you follow safety rules, think about safety measures, and use the Sky Viper app’s many features. Have fun flying!
5 Comments